how to remove headlight in Lada Grant

How to remove headlight in Lada Grant
Sometimes the front headlight on your Lada Grant needs replacement or cleaning. Do not be scared, it is quite possible to do it yourself. This instruction will help you figure it out in the process, making it understandable and simple.
1. Preparation for work
Before you start, make sure you are in a safe place where you will not be disturbed. It is best to work on a flat surface to avoid random falls. Get ready for work: you will need a set of suitable tools (the key, possibly a screwdriver). It is also important to prepare a place for work. Cover the floor under the machine to protect it from possible leaks or spray. Make sure you have a cleaning rags at your fingertips, as well as the necessary supply of liquid to wash your hands. And, most importantly, turn on common sense and caution.
2. Disconnecting and dismantling the
First disconnect the battery terminals to avoid a short circuit and possible problems. After that, find the fasteners of the headlight. As a rule, these are bolts located around the perimeter. Unscrew these bolts with a suitable size key. Be careful not to damage the bolts and the headlight body. If there are complex elements or fasteners, do not hesitate to study the instructions for the repair of your car, which can be very useful. Carefully record the location of the elements. If the headlight is attached on plastic latches, gently move them without making unnecessary efforts. After all the mounts are weakened, carefully separate the headlight from the car, trying not to damage the wiring and other parts. Carefully pull the headlight, trying to adhere to it from both edges.
3. Important points and subsequent actions
After the headlight is removed, make sure you checked all the mounts and connections. If the headlight was polluted, clean it thoroughly. If the headlight requires replacement, make sure that you have purchased a suitable part. When installing a new headlight, repeat all actions in the reverse order. Make sure all the bolts are tightened with the required effort. Turn on the ignition and check if the headlight is working properly. It is important to observe the sequence of actions so as not to damage the details and prevent mistakes. If you have any questions left, consult a specialist. After completing work, be sure to connect the battery terminals.